Yapbond Primer Ultra

Used as a primer in horizontal and vertical applications, both indoors and outdoors, on smooth and glossy surfaces such as ceramics and marble. Used to increase bonding and adherence before ceramic-on-ceramic applications.

Ensure that the surface is clean, dry and strong. Remove dust, dirt, mold oil, slag and paint residues that prevent adhesion on the application surface. Scrape sub-surfaces that are not self-supporting such as cracked plasters, weak surfaces, mortar and cement residues from the surface. Scrape off any plaster thinner than 3 mm on the application surface and clean the surface thoroughly. In case of defects and cracks on the application surface, fix them using YAPBUILT © range of repair mortars at least 24 hours before the application. Prepare the surface through appropriate mechanical preparation techniques such as high pressure water or abrasive equipment.

YAPBOND© PRIMER ULTRA in 5 kg packaging is ready for use. Before use, mix with a low speed mechanical mixer until a homogeneous mixture is obtained without diluting. Apply the homogenized mixture to the surface in a single coat using a lambskin roller or brush.

Proceed with the adhesion of new ceramic at least 5 hours after the application of the primer on the existing old ceramics. Do not start the application of adhesive before the primer application cures. Curing time for the applied product is 45 – 60 minutes. Low temperatures and high relative humidity will extend this period. Exercise due care to ensure that YAPBOND© PRIMER ULTRA is not contaminated during application in order to maintain the surface adherence it will provide

Ensure that surface temperature ranges between +5oC and +35oC during application. After the application, protect the application surfaces from direct sunlight for 24 hours. In cases where the temperature of the application surface exceeds +35C, identify the absorbency of the surface and take precautions against excessively absorbent surfaces. Protect the surface from air drafts during and after application. Do not perform the application in rainy weather, and protect the application surface from rain for 24 hours. Do not apply this product on gypsum plaster, gypsum board and gypsum blocks. Do not apply on continuously wet and damp surfaces. The specified consumption amounts are for information purposes only. The consumption amounts may vary depending on the application conditions and surface properties. Do not add additives other than those listed in the Technical Data Sheet. Ensure that the products are protected against severe weather conditions and frost during storage. Wash hands and application tools with plenty of water after application.

It should be stored in a clean, dry and moisture-free environment between +50C and +350C, away from direct sunlight. It must be protected against water, frost and severe weather. En fazla 3 kat istifle depolanmalıdır. Uzun süreli depolamalarda ise kovalar üst üste konulmamalıdır. Belirtilmiş depolama koşullarına uyulması kaydı ile depolama ömrü üretim tarihinden itibaren en fazla 12 aydır.

First of all, all necessary Occupational Health and Safety measures should be taken in the areas where the application will be made and the procedures should be carried out by people who have technical knowledge and equipment. Occupational Health and Safety instructions must be followed in all works. In accordance with the Occupational Health and Safety instructions, it is obligatory to use all occupational safety equipment such as work clothes, protective gloves/goggles/masks during the application. For more information, the Material Safety Data Sheet (MSDS) should be reviewed. In addition, the application of the product; It should be done by people with sufficient technical knowledge, equipment and experience. The responsibility in this regard belongs exclusively to the user.

All information provided in this information sheet is advisory. All products should be used by people with technical knowledge and equipment, taking into account the recommendations. Any consequences that may occur during or after all use YAPKİM Yapı Kimya San. A.S. cannot be held responsible. This document is valid until a new one is issued and invalidates the old editions. YAPKİM Yapı Kimya San. A.S. may make changes in the nature of the product. It is imperative to take safety precautions during product use. These measures are not just those listed above, and it is the sole responsibility of the user to take all security measures.